The history of the canopy bed dates back to the Nomadic Age, when a tent was used as a home. Tents were built a little differently in those days. They were made by hammering four tall poles deep, into the ground, and covering the center with a sturdy cloth fabric. This fabric was attached to all four poles, and secured to provide an overhead cover. A bed was, then constructed out of straw, or palm leaves, and placed under the tent. This kind of overhead covering is now called a canopy. The tent, as it was called in the Nomadic Age, served multiple purposes. It was used as a bedroom, kitchen, and a general living area.

Today, there are absolutely amazing canopy beds. These beds range from twin size to king plus sizes. Canopy bed covers is what truly brings these beds to life. There was a time, when it was difficult to find canopy bed covers that fit a particular style, or size of the bed. Now, there is a wide variety of intricate patterns, designs, and sizes, of which to choose. The quality is excellent, and it is sometimes, hard to make a decision because of the vast selection of styles and fabrics that are available to choose from.

The designs can go from traditional, with an arch, to regular flat canopy top covers. The style and fabric of the canopy bed covers can be purchased in numerous patterns like: ruffles, lace, mesh, silk, cotton, crush velvet, sheer fabric, floral print designs, strips, soft colors to bold colors. Most of the bedding fabrics and materials are very durable, and made to be machine washable. This is a definite plus, because professionally cleaning this type of bedding can be very costly and also very time consuming.

Shopping for canopy bed covers can be great fun. There is the task of first finding the right type of durable cover. Next, finding the one that is most appealing, and not too expensive. Lastly, coordinating the entire bed, so that everything matches and looks fabulous. It is a good idea to change the bedding, regularly, and also according to the season. This way, a heavier fabric would be most useful in the winter; a lighter fabric would work better in the spring and summer seasons. The shopping could be done, in the store, online, or through a catalog purchase. Whatever way its done, the end results will be well worth the time spent shopping, and deciding what selection is best.

Shut off power at the circuit breaker, not at the wall switch. Double-check to assure the power is off. If you are replacing an old fan, don’t assume it was properly installed. Next, install the mounting plate. Thread the wires through the center of the plate. If bolts are provided, push each one through the mounting plate. With bolts in place, tighten the plate onto the ceiling.

Ready the fan for installation by following manufacturer’s assembly directions carefully. Assemble the down rod and canopy. Run fan leads through the downrod and screw on downrod tightly. Tighten set screws. Slip on canopy and then install the bulb shaped metal fitting at the top of the downrod. Do not attach fan blades at this time.

Wire the fan. Temporarily hang the fan from the hook on the mounting ring. Connect the copper ground wire to the green wire attached to the fan base. Be sure to connect black wire to black wire and white wire to white wire.

Attach the canopy to the mounting plate. Use a helper (if available) to support the fan motor while you drive the screws. Push wires and wire nuts up into the box to keep them from vibrating against the canopy. Clip canopy onto mounting plate and tighten screws. Now attach blades. Turn your power back on. Enjoy your fan.